PS5 Jailbreak

Download PS5 Jailbreak (Any Firmware)

Step 1: Download PS5 Jailbreak and GoldHEN

How to Jailbreak PS5 Full Guide With GoldHEN

PS5: How to run the PS5 Jailbreak (full guide with GoldHEN payload)

People who are new to the PS5 scene and joining us on their shiny jailbreak PS5 seem to be a bit confused about how to run the PS5 Jailbreak, and in particular how to inject payloads. Here’s a full guide on how to run the PS5 Jailbreak, from start to finish.

1. Prepare the magic USB stick
Note: This step is only required once. You’ll need to use the USB stick every time you Jailbreak, but this preparation step is only needed the first time.

The PS5 Jailbreak requires part of the exploit to be injected from a specifically crafted USB stick. You’ll need a dedicated USB stick for this, as it will be required each time you jailbreak the console, so use one that you don’t need for anything else. You don’t need anything huge, the image you’ll copy there is 4MB.

Download the file from the pOOBs5 Jailbreak’s
Plug your USB stick into your computer. You don’t need to format it, as the next step will do that for you.

Download and install a tool to write the img file to your usb stick, such as Win32 Disk Manager

You’ll need to know your PS5 IP address in order to send payload to it. Before starting the Jailbreak process, go and note down your console’s IP address:

Note down your PS5’s IP address in Settings > Network > View Connection Status

3. Run the Jailbreak on your console
With your PS5 running with any firmware and your magic usb stick in hand, let’s proceed to actually running the exploit.

When you reach the exploit page, you will see a loading screen

If the first step of the exploit (the webkit exploit) works, you will see a message asking you to insert the USB stick.

Go ahead and plug the usb stick (do not click the “ok” button of the dialog box!). A message saying “This USB Device Storage’s file system is unsupported” should pop up on the upper left of your screen

After that message has appeared, go ahead and click “ok” on the dialog box. You should now see a message saying “Awaiting payload

Your PS5 is now technically Jailbroken. Remove the usb stick from your PS5.
4. Inject a Payload
You will now be injecting a “payload”, that is, unsigned code that will run on your PS5. This can be something as simple as a bit of code that will be dumping some files from your PS5 firmware onto a disk, or run an ftp server on your PS5, or a full fledged Custom Firmware such as GoldHEN or Mira.

In this example, we’ll be injecting GoldHEN, but note that any compatible payload would work at this point.

Make sure the IP address is the one of your PS5, that the port is 9020, and load the .bin file for GoldHen that you just downloaded. Then click “inject payload”.

If everything works as expected, your PS5 should display that GoldHEN has been loaded successfully

To confirm that everything is in order, you can go to the PS5’s “Settings” menu, and you should see GoldHEN in there

That’s it! Now Your PS5 Is Jailbreak.

Related posts

Leave a Comment